Scaling the distribution of automated vehicles requires handling various unexpected and possibly dangerous situations, termed corner cases (CC). Since many modules of automated driving systems are based on machine learning (ML), CC are an essential part of the data for their development. However, there is only a limited amount of CC data in large-scale data collections, which makes them challenging in the context of ML. With a better understanding of CC, offline applications, e.g., dataset analysis, and online methods, e.g., improved performance of automated driving systems, can be improved. While there are knowledge-based descriptions and taxonomies for CC, there is little research on machine-interpretable descriptions. In this extended abstract, we will give a brief overview of the challenges and goals of such a description.

-- This paper introduces COR-MCTS (Conservation of Resources - Monte Carlo Tree Search), a novel tactical decision-making approach for automated driving focusing on maneuver planning over extended horizons. Traditional decision-making algorithms are often constrained by fixed planning horizons, typically up to 6 seconds for classical approaches and 3 seconds for learning-based methods limiting their adaptability in particular dynamic driving scenarios. However, planning must be done well in advance in environments such as highways, roundabouts, and exits to ensure safe and efficient maneuvers. T o address this challenge, we propose a hybrid method integrating Monte Carlo Tree Search (MCTS) with our prior utility-based framework, COR-MP (Conservation of Resources Model for Maneuver Planning). This combination enables long-term, real-time decision-making, significantly enhancing the ability to plan a sequence of maneuvers over extended horizons. Through simulations across diverse driving scenarios, we demonstrate that COR-MCTS effectively improves planning robustness and decision efficiency over extended horizons. The deployment of self-driving cars offers numerous benefits, such as improved transportation mobility, enhanced vehicle efficiency in terms of fuel consumption, and better traffic flow management [1], [2]. However, significant challenges remain before fully autonomous vehicles can be integrated into daily life.

Self-driving vehicles rely on sensory input to monitor their surroundings and continuously adapt to the most likely future road course. Predictive trajectory planning is based on snapshots of the (uncertain) road course as a key input. Under noisy perception data, estimates of the road course can vary significantly, leading to indecisive and erratic steering behavior. To overcome this issue, this paper introduces a predictive trajectory planning algorithm with a novel objective function: instead of targeting a single reference trajectory based on the most likely road course, tracking a series of target reference sets, called a target funnel, is considered. The proposed planning algorithm integrates probabilistic information about the road course, and thus implicitly considers regular updates to road perception. Our solution is assessed in a case study using real driving data collected from a prototype vehicle. The results demonstrate that the algorithm maintains tracking accuracy and substantially reduces undesirable steering commands in the presence of noisy road perception, achieving a 56% reduction in input costs compared to a certainty equivalent formulation.

With Highly Automated Driving (HAD), the driver can engage in non-driving-related tasks. In the event of a system failure, the driver is expected to reasonably regain control of the Automated Vehicle (AV). Incorrect system understanding may provoke misuse by the driver and can lead to vehicle-level hazards. ISO 21448, referred to as the standard for Safety of the Intended Functionality (SOTIF), defines misuse as usage of the system by the driver in a way not intended by the system manufacturer. Foreseeable Misuse (FM) implies anticipated system misuse based on the best knowledge about the system design and the driver behaviour. This is the underlying motivation to propose simulation-based testing of FM. The vital challenge is to perform a simulation-based testing for a SOTIF-related misuse scenario. Transverse Guidance Assist System (TGAS) is modelled for HAD. In the context of this publication, TGAS is referred to as the "system," and the driver is the human operator of the system. This publication focuses on implementing the Driver-Vehicle Interface (DVI) that permits the interactions between the driver and the system. The implementation and testing of a derived misuse scenario using the driving simulator ensure reasonable usage of the system by supporting the driver with unambiguous information on system functions and states so that the driver can conveniently perceive, comprehend, and act upon the information.

The integration of thermal imaging data with Multimodal Large Language Models (MLLMs) constitutes an exciting opportunity for improving the safety and functionality of autonomous driving systems and many Intelligent Transportation Systems (ITS) applications. This study investigates whether MLLMs can understand complex images from RGB and thermal cameras and detect objects directly. Our goals were to 1) assess the ability of the MLLM to learn from information from various sets, 2) detect objects and identify elements in thermal cameras, 3) determine whether two independent modality images show the same scene, and 4) learn all objects using different modalities. The findings showed that both GPT-4 and Gemini were effective in detecting and classifying objects in thermal images. Similarly, the Mean Absolute Percentage Error (MAPE) for pedestrian classification was 70.39% and 81.48%, respectively. Moreover, the MAPE for bike, car, and motorcycle detection were 78.4%, 55.81%, and 96.15%, respectively. Gemini produced MAPE of 66.53%, 59.35% and 78.18% respectively. This finding further demonstrates that MLLM can identify thermal images and can be employed in advanced imaging automation technologies for ITS applications.

In the event of a critical system failures in auto-mated vehicles, fail-operational or fail-safe measures provide minimum guarantees for the vehicle's performance, depending on which of its subsystems remain operational. Various such methods have been proposed which, upon failure, use different remaining sets of operational subsystems to execute maneuvers that bring the vehicle into a safe state under different environmental conditions. One particular such method proposes a fail-safe emergency stop system that requires no particular electric or electronic subsystem to be available after failure, and still provides a basic situation-dependent emergency stop maneuver. This is achieved by preemptively setting parameters to a hydraulic / mechanical system prior to failure, which after failure executes the preset maneuver "blindly". The focus of this paper is the particular challenge of implementing a lightweight planning algorithm that can cope with the complex uncertainties of the given task while still providing a globally optimal solution at regular intervals, based on the perceived and predicted environment of the automated vehicle.

Maps have played an indispensable role in enabling safe and automated driving. Although there have been many advances on different fronts ranging from SLAM to semantics, building an actionable hierarchical semantic representation of urban dynamic scenes from multiple agents is still a challenging problem. In this work, we present Collaborative URBan Scene Graphs (CURB-SG) that enable higher-order reasoning and efficient querying for many functions of automated driving. CURB-SG leverages panoptic LiDAR data from multiple agents to build large-scale maps using an effective graph-based collaborative SLAM approach that detects inter-agent loop closures. To semantically decompose the obtained 3D map, we build a lane graph from the paths of ego agents and their panoptic observations of other vehicles. Based on the connectivity of the lane graph, we segregate the environment into intersecting and non-intersecting road areas. Subsequently, we construct a multi-layered scene graph that includes lane information, the position of static landmarks and their assignment to certain map sections, other vehicles observed by the ego agents, and the pose graph from SLAM including 3D panoptic point clouds. We extensively evaluate CURB-SG in urban scenarios using a photorealistic simulator. We release our code at http://curb.cs.uni-freiburg.de.

Real-time perception and motion planning are two crucial tasks for autonomous driving. While there are many research works focused on improving the performance of perception and motion planning individually, it is still not clear how a perception error may adversely impact the motion planning results. In this work, we propose a joint simulation framework with LiDAR-based perception and motion planning for real-time automated driving. Taking the sensor input from the CARLA simulator with additive noise, a LiDAR perception system is designed to detect and track all surrounding vehicles and to provide precise orientation and velocity information. Next, we introduce a new collision bound representation that relaxes the communication cost between the perception module and the motion planner. A novel collision checking algorithm is implemented using line intersection checking that is more efficient for long distance range in comparing to the traditional method of occupancy grid. We evaluate the joint simulation framework in CARLA for urban driving scenarios. Experiments show that our proposed automated driving system can execute at 25 Hz, which meets the real-time requirement. The LiDAR perception system has high accuracy within 20 meters when evaluated with the ground truth. The motion planning results in consistent safe distance keeping when tested in CARLA urban driving scenarios.

The ethics of automated vehicles (AV) has received a great amount of attention in recent years, specifically in regard to their decisional policies in accident situations in which human harm is a likely consequence. After a discussion about the pertinence and cogency of the term 'artificial moral agent' to describe AVs that would accomplish these sorts of decisions, and starting from the assumption that human harm is unavoidable in some situations, a strategy for AV decision making is proposed using only pre-defined parameters to characterize the risk of possible accidents and also integrating the Ethical Valence Theory, which paints AV decision-making as a type of claim mitigation, into multiple possible decision rules to determine the most suitable action given the specific environment and decision context. The goal of this approach is not to define how moral theory requires vehicles to behave, but rather to provide a computational approach that is flexible enough to accommodate a number of human 'moral positions' concerning what morality demands and what road users may expect, offering an evaluation tool for the social acceptability of an automated vehicle's decision making.

Reinforcement learning has received high research interest for developing planning approaches in automated driving. Most prior works consider the end-to-end planning task that yields direct control commands and rarely deploy their algorithm to real vehicles. In this work, we propose a method to employ a trained deep reinforcement learning policy for dedicated high-level behavior planning. By populating an abstract objective interface, established motion planning algorithms can be leveraged, which derive smooth and drivable trajectories. Given the current environment model, we propose to use a built-in simulator to predict the traffic scene for a given horizon into the future. The behavior of automated vehicles in mixed traffic is determined by querying the learned policy. To the best of our knowledge, this work is the first to apply deep reinforcement learning in this manner, and as such lacks a state-of-the-art benchmark. Thus, we validate the proposed approach by comparing an idealistic single-shot plan with cyclic replanning through the learned policy. Experiments with a real testing vehicle on proving grounds demonstrate the potential of our approach to shrink the simulation to real world gap of deep reinforcement learning based planning approaches. Additional simulative analyses reveal that more complex multi-agent maneuvers can be managed by employing the cycling replanning approach.